Precautions when installing the speed sensor

Installspeed sensorIt is very difficult. If you do not pay attention, it is easy to damage the speed sensor. Therefore, special attention should be paid to the installation of the speed sensor. What specific aspects need attention? Let us introduce it in detail.

In general, the speed sensor is directly fastened and installed on the lifting rod or horizontal link or other transmission rod of the switch. During the installation of the sensor, special attention should be paid to the following 3 points:

1. The speed sensor is installed on the switch moving rod. When the switch is actuated, a certain position space should be reserved for the sensor up, down, left and right, so as to prevent the sensor from colliding with the surrounding switch elements during the movement and causing damage.

2 The direction of the socket of the speed sensor is different from the thickness of the moving rod. The clamp with the corresponding radius makes the sensor firmly clamped on the moving rod without shaking. When the switch is operated, the sensor should be able to withstand the movement of the moving rod and have no contact with the moving rod Relatively shaking, otherwise it may lead to inaccurate test data.

3. The direction of the speed sensor socket is consistent with the moving direction of the movable door. Try to protect it parallel to the moving door. If the installation is skewed, the measurement data may be inaccurate.